STM32F334 利用HRTIM1 PUSH-PULL模式ADC触发采样

所属分类:STM32F系列 浏览数:419 提问者:molink 提问时间:2018-06-13

问:

配置HRTIM1的 TA1/TA2为PUSH-PULL输出模式来驱动变压器一次侧H桥驱动电路, 怎样对PUSH和PULL期间一次侧电流进行ADC采样,来进行变压器纠偏移磁计算?


登录后回答。
图书推荐
Beginning STM32: Developing with FreeRTOS, libopencm3 and GCC

Beginning STM32: Developing with FreeRTOS, libopencm3 and GCC

Using FreeRTOS and libopencm3 instead of the Arduino software environment, ...
Programming With STM32 : Getting Started With the Nucleo Board

Programming With STM32 : Getting Started With the Nucleo Board

Get up and running programming the STM32 line using the hands-on information ...
野火:RT-Thread内核实现与应用开发实战指南

野火:RT-Thread内核实现与应用开发实战指南

第一部分“从0到1写RT-Thread内核”重点讲解RT-Thread的原理实现;第二部分“RTT内核...
广告